Dwyer Series 607 Differential Pressure Transmitter 607-1 607-3B 607-8 Series

Dwyer Series 607 Differential Pressure Transmitter 607-1 607-3B 607-8 Series 608 Series 668 Low Rnage 0 To 25" w.c

SPECIFICATIONS GENERAL Maximum Pressure: 10 psig (0.7kg/cm). Media Compatibility: Air and non-conduction, non-corrosive gases. ELECTRICAL Power Supply: 12-36 VDC, unregulated. Output Signal: 4-20 mA DC, two wire. Loop Resistance: 0-1090 ohms Vmin. = 12V + [(.022A)(RL)] Warm-up Time: 15 seconds. PERFORMANCE AT 70° F. Output at zero: 4 mA. Output at full span: 20 mA. Stability: ±0.5% of full span/year. Response Time: 250 msec. TEMPERATURE LIMITS Operating: -20 to 160°F (-29 to 71°C), 10-95% RH, non-condensing. Compensated: 35 to 135°F (2 to 57°C). Storage: -40 to 180°F (-40 to 82°F). Thermal Effects: ±0.015%F.S./°F (zero and span). MECHANICAL Housing: 300 Series stainless steel (NEMA 2). Pressure Connections: 4″ barbed stainless steel. Weight: 14 oz (397 g). Span and Zero: Factory set to specified range. Externally accessible, non-interactive, ±10% F.S. adjustment..Description The Dwyer Series 607 Differential Pressure Transmitter converts positive, negative (vacuum) or differential pressures of clean, dry air or other non-conductive, non-corrosive gases into a standard two wire, 4-20 mA output signal. Several factory calibrated models are available with ranges from 0-.10″ W.C. to 0-25″ W.C. All models employ a variable capacitance transducer with a micro-machined, ultra thin silicon diaphragm enabling precision measurement and control of very low pressures. Because no epoxies or other organics are used to seal the sensor, performance is exceptionally stable and drift free. It is also highly resistant to overpressure, shock and vibration. See specifications for complete details.

607 Differential Pressure Transmitter

607-3B Differential Pressure Transmitter

607-8 Differential Pressure Transmitter

Dwyer Series 607 Differential Pressure Transmitter 607-1 607-3B 607-8 Series Images